 |
 |
Oil Safe
Makes Lubrication Work - Easier - Safer - Faster
- Protect expensive lubricants from contamination and reduce machinery down time
- Minimise the risk
of dangerous and costly oil spills
- Heat & chemical resistant
- Strong and will survive the toughest conditions
- Manufactured from HDPE incorporating anti-static agents and UV radiation stabilisers
- Rust proof
Oil Safe Drums and Special Purpose Lids are
 |
Drums come in four sizes and can be matched with any of the special purpose Oil Safe Lids. |
 |
|
| Lids are fully interchangeable with each Oil Safe Drum size. Simply choose the most suitable lids for your lubrication work. |
 |
|
Available in 10 colours
|
|
|
|
Lubricant
grades can be colour coded with coloured lids and matching Contents
Labels. Ensure the right oil gets into the right machine - everytime!
|
Testimonials
"In over 30 years experience I have seen the results of inadequate lubricant storage and final delivery to many machines, which have resulted in thousands of hours down time. Oil Safe products go straight to the root cause of these problems." - Mr Phil Dunseath, Compressor Products International. (extract from testimonial)
"Since purchasing Oil Safe hand pumps and 3 litre drums I have reduced the oil refill time of gearboxes on packaging machinery from 1 hour to 10 minutes. I can now plan, with minimal disruption to the production schedule, the required off time to complete an oil change." - Testimonial by Mr. Alan Cuthbert, Asset Performance Facillitator, United Distillers & Vintners, Shieldhall Glasgow, Scotland.
"We have been using Oil Safe cans for the last two years and have found them to be very helpful in reducing lube related failures. We have managed to develop an effective lube system including the use of Oil Safe oil cans and have reduced lube related failures from 32 per year to 8 per year in two years time. I look forward to continuing a mutually satisfactory association with Oil Safe Systems in the future." - Testimonial by Mr Farooq Khan, Reliability Engineer, Poly Group, BP Chemicals, Grangemouth, United Kingdom.
More Information
Technical Data
Sealing Components
Nitrile 'O' Rings (Buna N) N7 70 Durometer
Service Temp Range
-40°C to 80°C / -40°F to 176°F
Chemical Resistance
High Density Polyethelene (HDPE) is a very chemically-resistant plastic however, contact with strong oxidising acids (eg. Ozone, Hydrogen Peroxide, Halogen etc) should be avoided.
SAFETY WARNING
NOT SUITABLE FOR USE WITH FUELS OR SOLVENTS
Oil Safe is a registered trademark of Oil Safe Systems Pty Ltd
